Vicious
-------
Vicious is a modular widget library for the "awesome" window manager,
derived from the "Wicked" widget library. It has some of the old
Wicked widget types, a few of them rewritten, and a good number of new
ones:
http://git.sysphere.org/vicious/about/
Vicious widget types are a framework for creating your own awesome
widgets. Before using a widget type *you* need to ensure that a valid
source of information exists.
Usage
-----
To use vicious move it to your awesome configuration directory in
$XDG_CONFIG_HOME (usually ~/.config):
$ mv vicious $XDG_CONFIG_HOME/awesome/
Your first step should be editing init.lua to comment out all the
widget types you don't need from the "Configure widgets" list. It is
not required but I suggest you do so to avoid having useless modules
sitting in your memory.
Then add the following to the top of your rc.lua:
require("vicious")
Once you create a widget (a textbox, graph or a progressbar) call
vicious.register() to register it with vicious:
vicious.register(widget, type, format, interval, warg)
widget
- widget created with widget() or awful.widget() (in case of a
graph or a progressbar)
type
- one of the available widget types, see below for a list
format
- string argument or a function
- $1, $2, $3... will be replaced by their respective value
returned by the widget type, some widget types return tables
with string keys, in that case use: ${key}
- function
- function(widget, args) can be used to manipulate data
returned by the widget type, more about this below
interval
- number of seconds between updates of the widget, 2s by
default, also read the "Power" section below
warg
- some widget types require an argument to be passed, for example
the battery ID
Other functions
---------------
Unregister a widget:
vicious.unregister(widget, keep)
- if keep is true widget will be suspended, waiting to be
activated
Suspend all widgets:
vicious.suspend()
- example automation script for the "laptop-mode-tools" start-stop
module: http://sysphere.org/~anrxc/local/sources/lmt-vicious.sh
Restart suspended widgets:
vicious.activate(widget)
- if widget is provided only that widget will be activated
Enable caching of a widget type:
vicious.cache(type)
- enable caching of values returned by a widget type
Force update of widgets:
vicious.force({ widget, })
- widget argument is a table with one or more widgets that will be
updated
Power and Caching
-----------------
When a lot of widgets are in use they, and awesome, can generate a lot
of wake-ups and also be very expensive for system resources. This is
especially important when running on battery power. It was a big
problem with awesome v2 and widgets that used shell scripts to gather
data, and with widget libraries written in languages like Ruby.
Lua is an extremely fast and efficient programming language, and
Vicious takes advantage of that. But suspending Vicious widgets is one
way to prevent them from draining your battery, despite that.
Update intervals also play a big role, and you can save a lot of power
with a smart approach. Don't use intervals like: 5, 10, 30, 60... to
avoid harmonics. If you take the 60-second mark as an example, all of
your widgets would be executed at that point. Instead think about
using only prime numbers, in that case you will have only a few
widgets executed at any given time interval. When choosing intervals
also consider what a widget actually does. Some widget types read
files that reside in memory, others call external utilities and some,
like the mbox widget, read big files.
Vicious can also cache values returned by widget types. Caching
enables you to have multiple widgets using the same widget type. With
caching its worker function gets executed only once - which is also
great for saving power.
- Some widget types keep internal data and if you call one multiple
times without caching, the widget that executes it first would
modify stored values. This can lead to problems and give you
inconsistent data. Remember it for widget types like CPU and
Network usage, which compare the old set of data with the new one
to calculate current usage.
- Widget types that require a widget argument to be passed should be
handled carefully. If you are requesting information for different
devices then caching should not be used, because you could get
inconsistent data.
Security
--------
At the moment only one widget type (Gmail) requires auth. information
in order to get to the data. In the future there could be more, and
you should give some thought to the issue of protecting your data. The
Gmail widget type by default stores login information in the module it
self, and you are advised to make sure that file is only readable by
the owner. Other than that we can not force all users to conform to
one standard, one way of keeping it secure, like in some keyring.
First let's clear why we simply don't encrypt the login information
and store it in ciphertext. Answer is simple, that is no more secure
than having it stored in plaintext. By exposing the algorithm anyone
can reverse the encryption steps. Some claim even that's better than
plaintext but it's just security trough obscurity.
Here are some ideas actually worth your time. Users that have KDE (or
parts of it) installed could store their login information into the
Kwallet service and request it via DBus from the widget type. It can
be done with tools like "dbus-send" and "qdbus". The Gnome keyring
should support the same, so those with parts of Gnome installed could
use that keyring.
Some users move their login into an external file and read it from
there. Not much different than keeping it in the module, but what if
you encrypt the file with your GPG key? Users of the GPG Passphrase
Agent could decrypt the file transparently while their session is
active.
Widget types
------------
Widget types consist of worker functions that take the "format"
argument given to vicious.register as the first argument, "warg" as
the second, and return a table of values to insert in the format
string.
vicious.widgets.cpu
- provides CPU usage for all available CPUs/cores
- returns 1st value as usage of all CPUs/cores, 2nd as usage of
first CPU/core, 3rd as usage of second CPU/core etc.
vicious.widgets.cpuinf
- provides speed and cache information for all available CPUs/cores
- returns a table with string keys, using CPU ID as a base:
{cpu0 mhz}, {cpu0 ghz}, {cpu0 kb}, {cpu0 mb}, {cpu1 mhz} etc.
vicious.widgets.cpufreq
- provides freq, voltage and governor info for a requested CPU
- takes the CPU ID as an argument, i.e. "cpu0"
- returns 1st value as frequency of requested CPU in MHz, 2nd in
GHz, 3rd as voltage in mV, 4th as voltage in V and 5th as the
governor state
vicious.widgets.thermal
- provides temperature levels of ACPI and coretemp thermal zones
- takes the thermal zone as an argument, i.e. "thermal_zone0", or a
table with 1st field as thermal zone and 2nd as data source -
available data sources are "proc", "core" and "sys" - which is the
default when only the zone is provided
- returns 1st value as temperature of requested thermal zone
vicious.widgets.uptime
- provides system uptime and load information
- returns 1st value as uptime in days, 2nd as uptime in hours, 3rd
as uptime in minutes, 4th as load average for past 1 minute, 5th
for 5 minutes and 6th for 15 minutes
vicious.widgets.bat
- provides state, charge, and remaining time for a requested battery
- takes battery ID as an argument, i.e. "BAT0"
- returns 1st value as state of requested battery, 2nd as charge
level in percent and 3rd as remaining (charging or discharging)
time
vicious.widgets.mem
- provides RAM and Swap usage statistics
- returns 1st value as memory usage in percent, 2nd as memory usage,
3rd as total system memory, 4th as free memory, 5th as swap usage
in percent, 6th as swap usage, 7th as total system swap and 8th as
free swap
vicious.widgets.fs
- provides file system disk space usage
- takes an (optional) argument which, if true, includes remote file
systems, only local file systems are included by default
- returns a table with string keys, using mount points as a base:
{/ size_mb}, {/ size_gb}, {/ used_mb}, {/ used_gb}, {/ used_p},
{/ avail_mb}, {/ avail_gb}, {/home size_mb} etc.
vicious.widgets.dio
- provides I/O statistics for requested storage devices
- takes the disk as an argument, i.e. "sda"
- returns a table with string keys: {total_s}, {total_kb}, {total_mb},
{read_s}, {read_kb}, {read_mb}, {write_s}, {write_kb} and {write_mb}
vicious.widgets.hddtemp
- provides hard drive temperatures using the hddtemp daemon
- takes the hddtemp listening port as an argument, or defaults to
port 7634
- returns a table with string keys, using hard drives as a base:
{/dev/sda} and {/dev/sdc} for example
vicious.widgets.net
- provides usage statistics for all network interfaces
- returns a table with string keys, using net interfaces as a base:
{eth0 rx_b}, {eth0 tx_b}, {eth0 rx_kb}, {eth0 tx_kb}, {eth0 rx_mb},
{eth0 tx_mb}, {eth0 rx_gb}, {eth0 tx_gb}, {eth0 down_b}, {eth0 up_b},
{eth0 down_kb}, {eth0 up_kb}, {eth0 down_mb}, {eth0 up_mb},
{eth0 down_gb}, {eth0 up_gb}, {eth1 rx_b} etc.
vicious.widgets.wifi
- provides wireless information for a requested interface
- takes the network interface as an argument, i.e. "wlan0"
- returns a table with string keys: {ssid}, {mode}, {chan}, {rate},
{link} and {sign}
vicious.widgets.mbox
- provides the subject of last e-mail in a mbox file
- takes the full path to the mbox as an argument, or a table with
1st field as path, 2nd as maximum lenght and 3rd (optional) as
widget name - if 3rd field is present scrolling will be used
- returns 1st value as the subject of the last e-mail
vicious.widgets.mboxc
- provides the count of total, old and new messages in mbox files
- takes a table with full paths to mbox files as an argument
- returns 1st value as the total count of messages, 2nd as the count
of old messages and 3rd as the count of new messages
vicious.widgets.mdir
- provides the number of new and unread messages in Maildir
structures/directories
- takes a table with full paths to Maildir structures as an argument
- returns 1st value as the count of new messages and 2nd as the
count of "old" messages lacking the Seen flag
vicious.widgets.gmail
- provides count of new and subject of last e-mail on Gmail
- takes an (optional) argument, if it's a number subject will be
truncated, if a table, with 1st field as maximum lenght and 2nd
the widget name (i.e. "gmailwidget"), scrolling will be used
- returns a table with string keys: {count} and {subject}
vicious.widgets.entropy
- provides available system entropy
- returns 1st value as available system entropy and 2nd value as
available entropy in percent
vicious.widgets.org
- provides agenda statistics for Emacs org-mode
- takes a table with full paths to agenda files, that will be
parsed, as an argument
- returns 1st value as count of tasks you forgot to do, 2nd as count
of tasks for today, 3rd as count of tasks for the next 3 days and
4th as count of tasks to do in the week
vicious.widgets.pkg
- provides number of pending updates on GNU/Linux
- takes the distribution name as an argument, i.e. "Arch"
- returns 1st value as the count of available updates
vicious.widgets.mpd
- provides the currently playing song in MPD
- takes an (optional) argument, if it's a number song name will be
truncated, if a table, with 1st field as maximum lenght and 2nd
the widget name (i.e. "mpdwidget"), scrolling will be used
- returns 1st value as the currently playing song
vicious.widgets.volume
- provides volume levels and state of requested ALSA mixers
- takes the ALSA mixer control as an argument, i.e. "Master",
optionally append the card ID or other options, i.e. "PCM -c 0"
- returns 1st value as the volume level and 2nd as the mute state of
the requested channel
vicious.widgets.weather
- provides weather information for a requested station
- takes the ICAO station code as an argument, i.e. "LDRI"
- returns a table with string keys: {city}, {wind}, {windmph},
{windkmh}, {sky}, {weather}, {tempf}, {tempc}, {humid}, {press}
vicious.widgets.date
- provides access to os.date, with optional custom formatting;
provided as the format string
- returns the output of os.date(), formatted by provided sequences
Custom widget types
-------------------
Use any of the existing widget types as a starting point for your
own. Write a quick worker function that does the work and plug it
in. How data will be formatted, will it be red or blue, should be
defined in rc.lua (or somewhere else, outside the actual module).
Usage examples
--------------
Start with a simple widget, like date. Then build your setup from
there, one widget at a time. Also remember that besides creating and
registering widgets you have to add them to a wibox (statusbar) in
order to actually display them.
Date widget
datewidget = widget({ type = 'textbox' })
vicious.register(datewidget, vicious.widgets.date, '%b %d, %R')
- updated every 2 seconds (the default interval), uses standard
date sequences as the format string
Memory widget
memwidget = widget({ type = 'textbox' })
vicious.cache(vicious.widgets.mem)
vicious.register(memwidget, vicious.widgets.mem, '$1 ($2MB/$3MB)', 13)
- updated every 13 seconds, appends "MB" to 2nd and 3rd returned
values and enables caching of this widget type
HDD temperature widget
hddtempwidget = widget({ type = 'textbox' })
vicious.register(hddtempwidget, vicious.widgets.hddtemp, '${/dev/sda}°C', 19)
- updated every 19 seconds, requests the temperature level of the
{/dev/sda} key/disk and appends "°C" to the returned value, does
not provide the port argument so default port is used
Mbox widget
mboxwidget = widget({ type = 'textbox' })
vicious.register(mboxwidget, vicious.widgets.mbox, '$1', 5, '/home/user/mail/Inbox')
- updated every 5 seconds, provides full path to the mbox as an
argument
Battery widget
batwidget = awful.widget.progressbar()
batwidget:set_width(8)
batwidget:set_height(10)
batwidget:set_vertical(true)
batwidget:set_background_color('#494B4F')
batwidget:set_border_color(nil)
batwidget:set_color('#AECF96')
batwidget:set_gradient_colors({ '#AECF96', '#88A175', '#FF5656' })
vicious.register(batwidget, vicious.widgets.bat, '$2', 61, 'BAT0')
- updated every 61 seconds, requests the current battery charge
level and displays a progressbar, provides "BAT0" battery ID as an
argument
CPU usage widget
cpuwidget = awful.widget.graph()
cpuwidget:set_width(50)
cpuwidget:set_background_color('#494B4F')
cpuwidget:set_color('#FF5656')
cpuwidget:set_gradient_colors({ '#FF5656', '#88A175', '#AECF96' })
vicious.register(cpuwidget, vicious.widgets.cpu, '$1', 3)
- updated every 3 seconds, feeds the graph with total usage
percentage of all CPUs/cores
Format functions
----------------
You can use a function instead of a string as the format parameter.
Then you are able to check the value returned by the widget type and
change it or perform some action. You can change the color of the
battery widget when it goes below a certain point, hide widgets when
they return a certain value or maybe use string.format for padding.
- Do not confuse this with just coloring the widget, in those cases
standard pango markup can be inserted into the format string.
The format function will get the widget as its first argument, table
with the values otherwise inserted into the format string as its
second argument, and will return the text/data to be used for the
widget.
Example
mpdwidget = widget({ type = 'textbox' })
vicious.register(mpdwidget,vicious.widgets.mpd,
function (widget, args)
if args[1] == 'Stopped' then return ''
else return 'MPD: '..args[1]
end
end)
- hides the mpd widget when no song is playing, updated every 2
seconds (the default interval)
Example
uptimewidget = widget({ type = 'textbox' })
vicious.register(uptimewidget, vicious.widgets.uptime,
function (widget, args)
return string.format('Uptime: %2dd %02d:%02d ', args[1], args[2], args[3])
end, 61)
- uses string.format for padding uptime values to a minimum amount
of digits, updated every 61 seconds
When it comes to padding it is also useful to mention how a widget can
be configured to have a fixed width. You can set a fixed width on your
textbox widgets by changing their .width field (by default width is
automatically adapted to text width).
Example
uptimewidget = widget({ type = 'textbox' })
uptimewidget.width, uptimewidget.align = 50, 'right'
vicious.register(uptimewidget, vicious.widgets.uptime, '$1 $2:$3', 61)
- forces a fix width of 50px to the uptime widget, and aligns its
text to the right
Other
-----
Read "awesome" manual pages:
awesome(1) awesomerc(5)
Awesome widgets explained:
http://awesome.naquadah.org/wiki/Widgets_in_awesome
Example "awesome" configuration:
http://git.sysphere.org/awesome-configs/
Authors
-------
Vicious, written by:
Adrian C. (anrxc)
Wicked, written by:
Lucas de Vries