# # Alpine configuration file, using alpine 2.00 on Arch GNU/Linux # * Adrian C. # # - I removed some filters and addresses before sharing, # all such changes are noted with "REMOVED" # # Over-rides your full name from Unix password file. Required for PC-Pine. personal-name=anrxc # Sets domain part of From: and local addresses in outgoing mail. user-domain=sysphere.org # List of SMTP servers for sending mail. If blank: Unix Pine uses sendmail. smtp-server=localhost # NNTP server for posting news. Also sets news-collections for news reading. nntp-server=news.t-com.hr, news.eternal-september.org/user=anrxc, news.gmane.org # Path of (local or remote) INBOX, e.g. ={mail.somewhere.edu}inbox # Normal Unix default is the local INBOX (usually /usr/spool/mail/$USER). inbox-path=~/mail/Inbox # List of folder pairs; the first indicates a folder to archive, and the # second indicates the folder read messages in the first should # be moved to. incoming-archive-folders= # List of folders, assumed to be in first folder collection, # offered for pruning each month. For example: mumble pruned-folders= # Over-rides default path for sent-mail folder, e.g. =old-mail (using first # folder collection dir) or ={host2}sent-mail or ="" (to suppress saving). # Default: sent-mail (Unix) or SENTMAIL.MTX (PC) in default folder collection. default-fcc=~/mail/Sent # Over-rides default path for saved-msg folder, e.g. =saved-messages (using 1st # folder collection dir) or ={host2}saved-mail or ="" (to suppress saving). # Default: saved-messages (Unix) or SAVEMAIL.MTX (PC) in default collection. default-saved-msg-folder=~/mail/Saved # Over-rides default path for postponed messages folder, e.g. =pm (which uses # first folder collection dir) or ={host4}pm (using home dir on host4). # Default: postponed-msgs (Unix) or POSTPOND.MTX (PC) in default fldr coltn. postponed-folder=~/mail/Outbox # If set, specifies where already-read messages will be moved upon quitting. read-message-folder= # If set, specifies where form letters should be stored. form-letter-folder= # Contains the actual signature contents as opposed to the signature filename. # If defined, this overrides the signature-file. Default is undefined. literal-signature= # Over-rides default path for signature file. Default is ~/.signature signature-file=~/.sig # List of features; see Pine's Setup/options menu for the current set. # e.g. feature-list= select-without-confirm, signature-at-bottom # Default condition for all of the features is no-. feature-list=signature-at-bottom, include-text-in-reply, enable-aggregate-command-set, enable-bounce-cmd, enable-flag-cmd, prefer-plain-text, no-expunge-without-confirm, expunge-without-confirm-everywhere, quit-without-confirm, select-without-confirm, no-slash-collapses-entire-thread, enable-sigdashes, expose-hidden-config, allow-changing-from, enable-alternate-editor-cmd, disable-sender, warn-if-blank-to-and-cc-and-newsgroups, warn-if-blank-subject, enable-msg-view-urls, enable-msg-view-web-hostnames, quell-charset-warning, enable-multiple-newsrcs, hide-nntp-path, news-post-without-validation, enable-flag-screen-keyword-shortcut, enable-full-header-cmd, enable-unix-pipe-cmd, enable-8bit-esmtp-negotiation, enable-8bit-nntp-posting, downgrade-multipart-to-text, confirm-role-even-for-default, no-enable-incoming-folders, no-single-column-folder-list, no-vertical-folder-list, fcc-without-attachments, quell-timezone-comment-when-sending, scramble-message-id, no-enable-mouse-in-xterm, enable-newmail-in-xterm-icon, no-spell-check-before-sending, busy-cue-spinner-only, next-thread-without-confirm, return-to-inbox-without-confirm, compose-sets-newsgroup-without-confirm, enhanced-fancy-thread-support, thread-index-shows-important-color, no-thread-sorts-by-arrival, enable-topal-hack, no-news-approximates-new-status, convert-dates-to-localtime, quell-flowed-text # Pine executes these keys upon startup (e.g. to view msg 13: i,j,1,3,CR,v) initial-keystroke-list=i # Only show these headers (by default) when composing messages default-composer-hdrs= # When viewing messages, include this list of headers viewer-hdrs=Date, From, To, Cc, Subject, User-Agent, X-CRM114-Status # When viewing messages, number of blank spaces between left display edge and text viewer-margin-left= # When viewing messages, number of blank spaces between right display edge and text viewer-margin-right= # When viewing messages, number of lines of quote displayed before suppressing quote-suppression-threshold= # Determines default folder name for Saves... # Choices: default-folder, by-sender, by-from, by-recipient, last-folder-used. # Default: "default-folder", i.e. "saved-messages" (Unix) or "SAVEMAIL" (PC). saved-msg-name-rule= # Determines default name for Fcc... # Choices: default-fcc, by-recipient, last-fcc-used. # Default: "default-fcc" (see also "default-fcc=" variable.) fcc-name-rule= # Sets presentation order of messages in Index. Choices: # subject, from, arrival, date, size. Default: "arrival". sort-key=tHread # Sets presentation order of address book entries. Choices: dont-sort, # fullname-with-lists-last, fullname, nickname-with-lists-last, nickname # Default: "fullname-with-lists-last". addrbook-sort-rule= # Sets presentation order of folder list entries. Choices: alphabetical, # alpha-with-dirs-last, alpha-with-dirs-first. # Default: "alpha-with-directories-last". folder-sort-rule= # Sets the default folder and collectionoffered at the Goto Command's prompt. goto-default-rule= # Sets message which cursor begins on. Choices: first-unseen, first-recent, # first-important, first-important-or-unseen, first-important-or-recent, # first, last. Default: "first-unseen". incoming-startup-rule=first-unseen # Allows a default answer for the prune folder questions. Choices: yes-ask, # yes-no, no-ask, no-no, ask-ask, ask-no. Default: "ask-ask". pruning-rule=no-ask # Controls behavior when reopening an already open folder. folder-reopen-rule=yes-yes # Style that MESSAGE INDEX is displayed in when threading. threading-display-style=struct # Style of THREAD INDEX or default MESSAGE INDEX when threading. threading-index-style=coll # When threading, character used to indicate collapsed messages underneath. threading-indicator-character= # When threading, character used to indicate expanded messages underneath. threading-expanded-character= # When threading, character used to indicate this is the last reply # to the parent of this message. threading-lastreply-character= # Reflects capabilities of the display you have. Default: US-ASCII. # Typical alternatives include ISO-8859-x, (x is a number between 1 and 9). character-set=UTF-8 # Pine will try to convert from this charset value to your display # charset whenever it has no information about the charset of the mail. assumed-charset=windows-1250 # Specifies the program invoked by ^_ in the Composer, # or the "enable-alternate-editor-implicitly" feature. editor=emacsclient # Specifies the program invoked by ^T in the Composer. speller=~/code/bin/alspell.sh # Specifies the column of the screen where the composer should wrap. composer-wrap-column=72 # Specifies the string to insert when replying to a message. reply-indent-string= # Specifies the introduction to insert when replying to a message. reply-leadin= # Specifies the string to use when sending a message with no to or cc. empty-header-message= # Program to view images (e.g. GIF or TIFF attachments). image-viewer= # If "user-domain" not set, strips hostname in FROM address. (Unix only) use-only-domain-name= # This variable takes a list of programs that message text is piped into # after MIME decoding, prior to display. display-filters=_BEGINNING("-----BEGIN PGP ")_ /usr/bin/topal -display _TMPFILE_ _RESULTFILE_ # This defines a program that message text is piped into before MIME # encoding, prior to sending sending-filters=/usr/bin/topal -send _TMPFILE_ _RESULTFILE_ _RECIPIENTS_, /usr/bin/topal -sendmime _TMPFILE_ _RESULTFILE_ _MIMETYPE_ _RECIPIENTS_ # A list of alternate addresses the user is known by alt-addresses=REMOVED # A list of keywords for use in categorizing messages keywords= # This is a list of formats for address books. Each entry in the list is made # up of space-delimited tokens telling which fields are displayed and in # which order. See help text addressbook-formats= # This gives a format for displaying the index. It is made # up of space-delimited tokens telling which fields are displayed and in # which order. See help text index-format= # The number of lines of overlap when scrolling through message text viewer-overlap= # Number of lines from top and bottom of screen where single # line scrolling occurs. scroll-margin= # The number of seconds to sleep after writing a status message status-message-delay= # The approximate number of seconds between checks for new mail mail-check-interval= # The approximate number of seconds between checks for new mail in folders # other than the current folder and inbox. # Default is same as mail-check-interval mail-check-interval-noncurrent= # The minimum number of seconds between checks for new mail in a Mail Drop. # This is always effectively at least as large as the mail-check-interval maildrop-check-minimum= # For newsgroups accessed using NNTP, only messages numbered in the range # lastmsg-range+1 to lastmsg will be considered nntp-range=500 # Full path and name of NEWSRC file newsrc-path= # Path and filename of news configation's active file. # The default is typically "/usr/lib/news/active". news-active-file-path= # Directory containing system's news data. # The default is typically "/usr/spool/news" news-spool-directory= # Path and filename of the program used to upload text from your terminal # emulator's into Pine's composer. upload-command= # Text sent to terminal emulator prior to invoking the program defined by # the upload-command variable. # Note: _FILE_ will be replaced with the temporary file used in the upload. upload-command-prefix= # Path and filename of the program used to download text via your terminal # emulator from Pine's export and save commands. download-command= # Text sent to terminal emulator prior to invoking the program defined by # the download-command variable. # Note: _FILE_ will be replaced with the temporary file used in the downlaod. download-command-prefix= # Sets the search path for the mailcap configuration file. # NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2. mailcap-search-path= # Sets the search path for the mimetypes configuration file. # NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2. mimetype-search-path= # List of programs to open Internet URLs (e.g. http or ftp references). url-viewers=/usr/local/bin/firefox,/usr/bin/links # The maximum number of non-stayopen remote connections that pine will use max-remote-connections= # A list of folders that should be left open once opened (INBOX is implicit) stay-open-folders= # Specifies the number of dead letter files to keep when canceling. dead-letter-files= # List of incoming msg folders besides INBOX, e.g. ={host2}inbox, {host3}inbox # Syntax: optnl-label {optnl-imap-host-name}folder-path incoming-folders= # List of directories where saved-message folders may be. First one is # the default for Saves. Example: Main {host1}mail/[], Desktop mail\[] # Syntax: optnl-label {optnl-imap-hostname}optnl-directory-path[] folder-collections= # List, only needed if nntp-server not set, or news is on a different host # than used for NNTP posting. Examples: News *[] or News *{host3/nntp}[] # Syntax: optnl-label *{news-host/protocol}[] news-collections=News-Tcom {news.t-com.hr/nntp}#news.[], News-Motzarella {news.eternal-september.org/user=anrxc/nntp}#news.[], News-Gmane {news.gmane.org/nntp}#news.[] # List of file or path names for personal addressbook(s). # Default: ~/.addressbook (Unix) or \PINE\ADDRBOOK (PC) # Syntax: optnl-label path-name address-book= # List of file or path names for global/shared addressbook(s). # Default: none # Syntax: optnl-label path-name global-address-book= # Set by Pine; controls beginning-of-month sent-mail pruning. last-time-prune-questioned=110.2 # Set by Pine; controls display of "new version" message. last-version-used=6.00 # This names the path to an alternative program, and any necessary arguments, # to be used in posting mail messages. Example: # /usr/lib/sendmail -oem -t -oi # or, # /usr/local/bin/sendit.sh # The latter a script found in Pine distribution's contrib/util directory. # NOTE: The program MUST read the message to be posted on standard input, # AND operate in the style of sendmail's "-t" option. sendmail-path= # This names the root of the tree to which the user is restricted when reading # and writing folders and files. For example, on Unix ~/work confines the # user to the subtree beginning with their work subdirectory. # (Note: this alone is not sufficient for preventing access. You will also # need to restrict shell access and so on, see Pine Technical Notes.) # Default: not set (so no restriction) operating-dir= # If no user input for this many hours, Pine will exit if in an idle loop # waiting for a new command. If set to zero (the default), then there will # be no timeout. user-input-timeout= # Sets the time in seconds that Pine will attempt to open a network # connection. The default is 30, the minimum is 5, and the maximum is # system defined (typically 75). tcp-open-timeout= # Network read warning timeout. The default is 15, the minimum is 5, and the # maximum is 1000. tcp-read-warning-timeout=20 # Network write warning timeout. The default is 0 (unset), the minimum # is 5 (if not 0), and the maximum is 1000. tcp-write-warning-timeout= # If this much time has elapsed at the time of a tcp read or write # timeout, pine will ask if you want to break the connection. # Default is 60 seconds, minimum is 5, maximum is 1000. tcp-query-timeout=20 # Sets the format of the command used to open a UNIX remote # shell connection. The default is "%s %s -l %s exec /etc/r%sd" # NOTE: the 4 (four) "%s" entries MUST exist in the provided command # where the first is for the command's path, the second is for the # host to connnect to, the third is for the user to connect as, and the # fourth is for the connection method (typically "imap") rsh-command= # Sets the name of the command used to open a UNIX remote shell connection. # The default is tyically /usr/ucb/rsh. rsh-path= # Sets the time in seconds that Pine will attempt to open a UNIX remote # shell connection. The default is 15, min is 5, and max is unlimited. # Zero disables rsh altogether. rsh-open-timeout= # Sets the format of the command used to open a UNIX secure # shell connection. The default is "%s %s -l %s exec /etc/r%sd" # NOTE: the 4 (four) "%s" entries MUST exist in the provided command # where the first is for the command's path, the second is for the # host to connnect to, the third is for the user to connect as, and the # fourth is for the connection method (typically "imap") ssh-command= # Sets the name of the command used to open a UNIX secure shell connection. # Tyically this is /usr/bin/ssh. ssh-path= # Sets the time in seconds that Pine will attempt to open a UNIX secure # shell connection. The default is 15, min is 5, and max is unlimited. # Zero disables ssh altogether. ssh-open-timeout= # Sets the version number Pine will use as a threshold for offering # its new version message on startup. new-version-threshold= # List of mail drivers to disable. disable-these-drivers= # List of SASL authenticators to disable. disable-these-authenticators= # Set by Pine; contains data for caching remote address books. remote-abook-metafile= # How many extra copies of remote address book should be kept. Default: 3 remote-abook-history= # Minimum number of minutes between checks for remote address book changes. # 0 means never check except when opening a remote address book. # -1 means never check. Default: 5 remote-abook-validity= # Your default printer selection printer= # List of special print commands personal-print-command= # Which category default print command is in personal-print-category= # Patterns and their actions are stored here. patterns-roles=REMOVED # Patterns and their actions are stored here. patterns-filters2=REMOVED # Patterns and their actions are stored here. patterns-scores2= # Patterns and their actions are stored here. patterns-indexcolors= # Patterns and their actions are stored here. patterns-other= # Controls display of color # - 256 colors needed for the Zenburn color scheme color-style=force-xterm-256color # Controls display of color for current index line current-indexline-style=flip-colors # Controls display of color for the titlebar at top of screen titlebar-color-style=default # Alpine colors # - Zenburn color scheme normal-foreground-color=220,220,204 normal-background-color=60,60,60 reverse-foreground-color=204,147,147 reverse-background-color=60,60,60 title-foreground-color=172,188,144 title-background-color=30,35,32 status-foreground-color=239,239,143 status-background-color=60,60,60 keylabel-foreground-color=172,188,144 keylabel-background-color=30,35,32 keyname-foreground-color=172,188,144 keyname-background-color=30,35,32 selectable-item-foreground-color=240,223,175 selectable-item-background-color=60,60,60 quote1-foreground-color=127,159,127 quote1-background-color=60,60,60 quote2-foreground-color=176,196,222 quote2-background-color=60,60,60 quote3-foreground-color=127,127,127 quote3-background-color=60,60,60 signature-foreground-color=240,223,175 signature-background-color=60,60,60 prompt-foreground-color=176,196,222 prompt-background-color=60,60,60 meta-message-foreground-color=239,239,143 meta-message-background-color=60,60,60 index-to-me-foreground-color=240,223,175 index-to-me-background-color=60,60,60 index-important-foreground-color=red index-important-background-color=60,60,60 index-deleted-foreground-color=240,223,175 index-deleted-background-color=60,60,60 index-answered-foreground-color=240,223,175 index-answered-background-color=60,60,60 index-new-foreground-color=240,223,175 index-new-background-color=60,60,60 index-forward-foreground-color=240,223,175 index-forward-background-color=60,60,60 index-recent-foreground-color= index-recent-background-color= index-unseen-foreground-color= index-unseen-background-color= index-arrow-foreground-color=240,223,175 index-arrow-background-color=60,60,60 index-subject-foreground-color= index-subject-background-color= index-from-foreground-color= index-from-background-color= index-highpriority-foreground-color= index-highpriority-background-color= index-lowpriority-foreground-color= index-lowpriority-background-color= index-opening-foreground-color= index-opening-background-color= incoming-unseen-foreground-color= incoming-unseen-background-color= header-general-foreground-color=240,223,175 header-general-background-color=30,35,32 title-closed-foreground-color= title-closed-background-color= folder-foreground-color= folder-background-color= directory-foreground-color= directory-background-color= folder-list-text-foreground-color= folder-list-text-background-color= # Colors in which tokens will be displayed in the index screen index-token-colors= # - Humvee color scheme # normal-foreground-color=189,183,107 # normal-background-color=38,38,38 # reverse-foreground-color=255,215,0 # reverse-background-color=38,38,38 # title-foreground-color=white # title-background-color=102,102,102 # status-foreground-color=255,215,0 # status-background-color=38,38,38 # keylabel-foreground-color=white # keylabel-background-color=102,102,102 # keyname-foreground-color=white # keyname-background-color=102,102,102 # selectable-item-foreground-color=255,215,0 # selectable-item-background-color=38,38,38 # quote1-foreground-color=127,127,127 # quote1-background-color=38,38,38 # quote2-foreground-color=143,188,143 # quote2-background-color=38,38,38 # quote3-foreground-color=107,142,35 # quote3-background-color=38,38,38 # signature-foreground-color=154,205,50 # signature-background-color=38,38,38 # prompt-foreground-color=143,188,143 # prompt-background-color=38,38,38 # meta-message-foreground-color=255,215,0 # meta-message-background-color=38,38,38 # index-to-me-foreground-color=154,205,50 # index-to-me-background-color=38,38,38 # index-important-foreground-color=red # index-important-background-color=38,38,38 # index-deleted-foreground-color=154,205,50 # index-deleted-background-color=38,38,38 # index-answered-foreground-color=154,205,50 # index-answered-background-color=38,38,38 # index-new-foreground-color=154,205,50 # index-new-background-color=38,38,38 # index-forward-foreground-color=154,205,50 # index-forward-background-color=38,38,38 # index-recent-foreground-color= # index-recent-background-color= # index-unseen-foreground-color= # index-unseen-background-color= # index-arrow-foreground-color=154,205,50 # index-arrow-background-color=38,38,38 # index-subject-foreground-color= # index-subject-background-color= # index-from-foreground-color= # index-from-background-color= # index-highpriority-foreground-color= # index-highpriority-background-color= # index-lowpriority-foreground-color= # index-lowpriority-background-color= # index-opening-foreground-color= # index-opening-background-color= # incoming-unseen-foreground-color= # incoming-unseen-background-color= # header-general-foreground-color=154,205,50 # header-general-background-color=38,38,38 # title-closed-foreground-color= # title-closed-background-color= # When viewing messages, these are the header colors viewer-hdr-colors= # Add these customized headers (and possible default values) when composing customized-hdrs=From: REMOVED, User-Agent: Alpine/2.00 (Linux) # Specifies the string to replace quotes with when viewing a message. quote-replace-string= # Characters which surround keywords in SUBJKEY token. # Default is "{" "} " keyword-surrounding-chars= # Sets the filename for the newmail fifo (named pipe). Unix only. newmail-fifo-path= # Sets the width for the NewMail screen. newmail-window-width= # Colors used to display keywords in the index keyword-colors= # Reflects capabilities of the display you have. # If unset, the default is taken from your locale. That is usually the right # thing to use. Typical alternatives include UTF-8, ISO-8859-x, and EUC-JP # (where x is a number between 1 and 9). display-character-set= # Reflects capabilities of the keyboard you have. # If unset, the default is to use the same value # used for the display-character-set. keyboard-character-set= # Defaults to UTF-8. This is used for outgoing messages. # It is usually correct to leave this unset. posting-character-set= # Number of times per-second to update active status messages active-msg-updates-per-second= # Sets the time in seconds that Alpine will attempt to open a network # connection when checking for new unseen messages in an incoming folder. # The default is 5. incoming-check-timeout= # Sets the approximate number of seconds between checks for unseen messages # in incoming folders. The default is 180. incoming-check-interval= # List of incoming folders to check for unseen messages. The default if left # blank is to check all incoming folders. incoming-check-list= # WebAlpine index table row height wp-indexheight= # WebAlpine number of index lines in table wp-indexlines= # WebAlpine aggregate operations tab state wp-aggstate= # WebAlpine various aspects of cross-session state wp-state= # WebAlpine preferred width for message display in characters wp-columns= # Number of times per-second to update busy cue messages busy-cue-rate= # When these characters appear in the middle of a word in the composer # the forward word function will stop at the first text following (as happens # with SPACE characters by default) composer-word-separators= # Characters between subject and opening text in SUBJECTTEXT token. # Default is " - " opening-text-separator-chars= # Sets the approximate number of seconds between checks for unseen messages # for other than local or IMAP folders. The default is 180. incoming-check-interval-secondary= # Patterns and their actions are stored here. patterns-search= # LDAP servers for looking up addresses. ldap-servers= # Sets presentation order of threads in thread index. Choices: #arrival, and thread. thread-sort-key= # Allows a user to specify the threading style of specific folders threading-display-style-rule= # Allows a user to specify the threading index style of specific folders threading-index-style-rule= # Allows a user to set rules when composing messages. compose-rules= # Allows a user to set rules when forwarding messages. forward-rules= # Allows a user to supersede global index format variable in designated folders. index-rules= # Allows a user to override keystrokes in certain screens. key-definition-rules= # Allows a user to change the form a specify field in the index-format is # displayed. replace-rules= # Allows a user to change the form a specify a reply-indent-string # based of rules. reply-indent-rules= # Allows a user to replace the reply-leadin message based on different parameters. reply-leadin-rules= # Allows a user to replace the subject of a message in a customs based way reply-subject-rules= # Allows a user to specify a save folder message for specific senders or folders. save-rules= # Allows a user to specify a smtp server to be used when sending e-mail, # according to the rules specified here. smtp-rules= # Allows a user to specify the sort default order of a specific folder. sort-rules= # Allows a user to specify the position of a highlighted message when opening a # folder. startup-rules= # Specifies a comma separated list of text and regular expresions that Pine # will highlight special-text-color= special-text-foreground-color= special-text-background-color= # Location relative to your HOME directory of the directory where your INBOX # for the maildir format is located. Default value is "Maildir". If your # inbox is located at "~/Maildir" you do not need to change this value. # A common value is also ".maildir" maildir-location= # If set, specifies where trash is moved to in Web Alpine. trash-folder= # Defaults to nothing, which is equivalent to US-ASCII. This is used for # unlabeled incoming messages. It is ok to leave this unset but if you receive # unlabeled mail that is usually in some known character set, set that here. unknown-character-set= # Public certificates are kept in files in this directory. The files should # contain certificates in PEM format. The name of each file should look # like .crt. The default directory is .alpine-smime/public. smime-public-cert-directory= # If this option is set then public certificates are kept in a single container # "file" similar to a remote configuration file instead of in the # smime-publiccert-directory. The value can be a remote or local folder # specification like for a non-standard pinerc value. The default # is that it is not set. smime-public-cert-container= # Private keys are kept in files in this directory. The files are in PEM format. # The name of a file should look like .key. # The default directory is .alpine-smime/private. smime-private-key-directory= # If this option is set then private keys are kept in a single container # "file" similar to a remote configuration file instead of in the # private-key-directory. The value can be a remote or local folder # specification like for a non-standard pinerc value. The default # is that it is not set. smime-private-key-container= # Certificate Authority certificates (in addition to the normal CACerts for the # system) are kept in files in this directory. The files are in PEM format. # Filenames should end with .crt. The default directory is .alpine-smime/ca. smime-cacert-directory= # If this option is set then CAcerts are kept in a single container # "file" similar to a remote configuration file instead of in the # ca-cert-directory. The value can be a remote or local folder # specification like for a non-standard pinerc value. The default # is that it is not set. smime-cacert-container= # RSS News feed rss-news= # RSS Weather feed rss-weather=