From 43a1bc3094d1d8da0a2b2cedcf98cda6f450e00c Mon Sep 17 00:00:00 2001 From: "Adrian C. (anrxc)" Date: Fri, 11 Sep 2009 13:13:14 +0200 Subject: Initial import of dotfiles --- pinerc | 827 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 827 insertions(+) create mode 100644 pinerc (limited to 'pinerc') diff --git a/pinerc b/pinerc new file mode 100644 index 0000000..82c3fd2 --- /dev/null +++ b/pinerc @@ -0,0 +1,827 @@ +# +# Alpine configuration file, using alpine 2.00 on Arch GNU/Linux +# * Adrian C. +# +# - I removed some filters and addresses before sharing, +# all such changes are noted with "REMOVED" +# + +# Over-rides your full name from Unix password file. Required for PC-Pine. +personal-name=anrxc + +# Sets domain part of From: and local addresses in outgoing mail. +user-domain=sysphere.org + +# List of SMTP servers for sending mail. If blank: Unix Pine uses sendmail. +smtp-server=mail.t-com.hr + +# NNTP server for posting news. Also sets news-collections for news reading. +nntp-server=news.t-com.hr, + news.eternal-september.org/user=anrxc, + news.gmane.org + +# Path of (local or remote) INBOX, e.g. ={mail.somewhere.edu}inbox +# Normal Unix default is the local INBOX (usually /usr/spool/mail/$USER). +inbox-path=~/mail/Inbox + +# List of folder pairs; the first indicates a folder to archive, and the +# second indicates the folder read messages in the first should +# be moved to. +incoming-archive-folders= + +# List of folders, assumed to be in first folder collection, +# offered for pruning each month. For example: mumble +pruned-folders= + +# Over-rides default path for sent-mail folder, e.g. =old-mail (using first +# folder collection dir) or ={host2}sent-mail or ="" (to suppress saving). +# Default: sent-mail (Unix) or SENTMAIL.MTX (PC) in default folder collection. +default-fcc=~/mail/Sent + +# Over-rides default path for saved-msg folder, e.g. =saved-messages (using 1st +# folder collection dir) or ={host2}saved-mail or ="" (to suppress saving). +# Default: saved-messages (Unix) or SAVEMAIL.MTX (PC) in default collection. +default-saved-msg-folder=~/mail/Saved + +# Over-rides default path for postponed messages folder, e.g. =pm (which uses +# first folder collection dir) or ={host4}pm (using home dir on host4). +# Default: postponed-msgs (Unix) or POSTPOND.MTX (PC) in default fldr coltn. +postponed-folder=~/mail/Outbox + +# If set, specifies where already-read messages will be moved upon quitting. +read-message-folder= + +# If set, specifies where form letters should be stored. +form-letter-folder= + +# Contains the actual signature contents as opposed to the signature filename. +# If defined, this overrides the signature-file. Default is undefined. +literal-signature= + +# Over-rides default path for signature file. Default is ~/.signature +signature-file=~/.sigpg + +# List of features; see Pine's Setup/options menu for the current set. +# e.g. feature-list= select-without-confirm, signature-at-bottom +# Default condition for all of the features is no-. +feature-list=signature-at-bottom, + include-text-in-reply, + enable-aggregate-command-set, + enable-bounce-cmd, + enable-flag-cmd, + prefer-plain-text, + no-expunge-without-confirm, + expunge-without-confirm-everywhere, + quit-without-confirm, + select-without-confirm, + no-slash-collapses-entire-thread, + enable-sigdashes, + expose-hidden-config, + allow-changing-from, + enable-alternate-editor-cmd, + disable-sender, + warn-if-blank-to-and-cc-and-newsgroups, + warn-if-blank-subject, + enable-msg-view-urls, + enable-msg-view-web-hostnames, + quell-charset-warning, + enable-multiple-newsrcs, + hide-nntp-path, + news-post-without-validation, + enable-flag-screen-keyword-shortcut, + enable-full-header-cmd, + enable-unix-pipe-cmd, + enable-8bit-esmtp-negotiation, + enable-8bit-nntp-posting, + downgrade-multipart-to-text, + confirm-role-even-for-default, + no-enable-incoming-folders, + no-single-column-folder-list, + no-vertical-folder-list, + fcc-without-attachments, + quell-timezone-comment-when-sending, + scramble-message-id, + no-enable-mouse-in-xterm, + enable-newmail-in-xterm-icon, + no-spell-check-before-sending, + busy-cue-spinner-only, + next-thread-without-confirm, + return-to-inbox-without-confirm, + compose-sets-newsgroup-without-confirm, + enhanced-fancy-thread-support, + thread-index-shows-important-color, + no-thread-sorts-by-arrival, + enable-topal-hack, + no-news-approximates-new-status, + convert-dates-to-localtime + +# Pine executes these keys upon startup (e.g. to view msg 13: i,j,1,3,CR,v) +initial-keystroke-list=i + +# Only show these headers (by default) when composing messages +default-composer-hdrs= + +# When viewing messages, include this list of headers +viewer-hdrs=Date, + From, + To, + Cc, + Subject, + User-Agent, + X-CRM114-Status + +# When viewing messages, number of blank spaces between left display edge and text +viewer-margin-left= + +# When viewing messages, number of blank spaces between right display edge and text +viewer-margin-right= + +# When viewing messages, number of lines of quote displayed before suppressing +quote-suppression-threshold= + +# Determines default folder name for Saves... +# Choices: default-folder, by-sender, by-from, by-recipient, last-folder-used. +# Default: "default-folder", i.e. "saved-messages" (Unix) or "SAVEMAIL" (PC). +saved-msg-name-rule= + +# Determines default name for Fcc... +# Choices: default-fcc, by-recipient, last-fcc-used. +# Default: "default-fcc" (see also "default-fcc=" variable.) +fcc-name-rule= + +# Sets presentation order of messages in Index. Choices: +# subject, from, arrival, date, size. Default: "arrival". +sort-key=tHread + +# Sets presentation order of address book entries. Choices: dont-sort, +# fullname-with-lists-last, fullname, nickname-with-lists-last, nickname +# Default: "fullname-with-lists-last". +addrbook-sort-rule= + +# Sets presentation order of folder list entries. Choices: alphabetical, +# alpha-with-dirs-last, alpha-with-dirs-first. +# Default: "alpha-with-directories-last". +folder-sort-rule= + +# Sets the default folder and collectionoffered at the Goto Command's prompt. +goto-default-rule= + +# Sets message which cursor begins on. Choices: first-unseen, first-recent, +# first-important, first-important-or-unseen, first-important-or-recent, +# first, last. Default: "first-unseen". +incoming-startup-rule=first-unseen + +# Allows a default answer for the prune folder questions. Choices: yes-ask, +# yes-no, no-ask, no-no, ask-ask, ask-no. Default: "ask-ask". +pruning-rule=no-ask + +# Controls behavior when reopening an already open folder. +folder-reopen-rule=yes-yes + +# Style that MESSAGE INDEX is displayed in when threading. +threading-display-style=struct + +# Style of THREAD INDEX or default MESSAGE INDEX when threading. +threading-index-style=coll + +# When threading, character used to indicate collapsed messages underneath. +threading-indicator-character= + +# When threading, character used to indicate expanded messages underneath. +threading-expanded-character= + +# When threading, character used to indicate this is the last reply +# to the parent of this message. +threading-lastreply-character= + +# Reflects capabilities of the display you have. Default: US-ASCII. +# Typical alternatives include ISO-8859-x, (x is a number between 1 and 9). +character-set=UTF-8 + +# Pine will try to convert from this charset value to your display +# charset whenever it has no information about the charset of the mail. +assumed-charset=windows-1250 + +# Specifies the program invoked by ^_ in the Composer, +# or the "enable-alternate-editor-implicitly" feature. +editor=emacsclient + +# Specifies the program invoked by ^T in the Composer. +speller=~/code/bin/alspell.sh + +# Specifies the column of the screen where the composer should wrap. +composer-wrap-column=72 + +# Specifies the string to insert when replying to a message. +reply-indent-string= + +# Specifies the introduction to insert when replying to a message. +reply-leadin= + +# Specifies the string to use when sending a message with no to or cc. +empty-header-message= + +# Program to view images (e.g. GIF or TIFF attachments). +image-viewer= + +# If "user-domain" not set, strips hostname in FROM address. (Unix only) +use-only-domain-name= + +# This variable takes a list of programs that message text is piped into +# after MIME decoding, prior to display. +# Topal +#display-filters=_BEGINNING("-----BEGIN PGP ")_ /usr/local/bin/topal -display _TMPFILE_ _RESULTFILE_ +# PinePG +display-filters=_LEADING("-----BEGIN PGP MESSAGE-----")_ /usr/local/src/pinepg/decrypt _RESULTFILE_ _DATAFILE_ _PREPENDKEY_, + _LEADING("-----BEGIN PGP SIGNED MESSAGE-----")_ /usr/local/src/pinepg/verify _TMPFILE_ _RESULTFILE_ + +# This defines a program that message text is piped into before MIME +# encoding, prior to sending +# Topal +#sending-filters=/usr/local/bin/topal -send _TMPFILE_ _RESULTFILE_ _RECIPIENTS_, +# /usr/local/bin/topal -sendmime _TMPFILE_ _RESULTFILE_ _MIMETYPE_ _RECIPIENTS_ +# PinePG +sending-filters=/usr/local/src/pinepg/clearsign _RESULTFILE_ _DATAFILE_ _PREPENDKEY_, + /usr/local/src/pinepg/encrypt _RECIPIENTS_ _RESULTFILE_ _DATAFILE_ _PREPENDKEY_ + +# A list of alternate addresses the user is known by +alt-addresses=REMOVED + +# A list of keywords for use in categorizing messages +keywords= + +# This is a list of formats for address books. Each entry in the list is made +# up of space-delimited tokens telling which fields are displayed and in +# which order. See help text +addressbook-formats= + +# This gives a format for displaying the index. It is made +# up of space-delimited tokens telling which fields are displayed and in +# which order. See help text +index-format= + +# The number of lines of overlap when scrolling through message text +viewer-overlap= + +# Number of lines from top and bottom of screen where single +# line scrolling occurs. +scroll-margin= + +# The number of seconds to sleep after writing a status message +status-message-delay= + +# The approximate number of seconds between checks for new mail +mail-check-interval= + +# The approximate number of seconds between checks for new mail in folders +# other than the current folder and inbox. +# Default is same as mail-check-interval +mail-check-interval-noncurrent= + +# The minimum number of seconds between checks for new mail in a Mail Drop. +# This is always effectively at least as large as the mail-check-interval +maildrop-check-minimum= + +# For newsgroups accessed using NNTP, only messages numbered in the range +# lastmsg-range+1 to lastmsg will be considered +nntp-range=500 + +# Full path and name of NEWSRC file +newsrc-path= + +# Path and filename of news configation's active file. +# The default is typically "/usr/lib/news/active". +news-active-file-path= + +# Directory containing system's news data. +# The default is typically "/usr/spool/news" +news-spool-directory= + +# Path and filename of the program used to upload text from your terminal +# emulator's into Pine's composer. +upload-command= + +# Text sent to terminal emulator prior to invoking the program defined by +# the upload-command variable. +# Note: _FILE_ will be replaced with the temporary file used in the upload. +upload-command-prefix= + +# Path and filename of the program used to download text via your terminal +# emulator from Pine's export and save commands. +download-command= + +# Text sent to terminal emulator prior to invoking the program defined by +# the download-command variable. +# Note: _FILE_ will be replaced with the temporary file used in the downlaod. +download-command-prefix= + +# Sets the search path for the mailcap configuration file. +# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2. +mailcap-search-path= + +# Sets the search path for the mimetypes configuration file. +# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2. +mimetype-search-path= + +# List of programs to open Internet URLs (e.g. http or ftp references). +url-viewers=/usr/local/bin/firefox,/usr/bin/links + +# The maximum number of non-stayopen remote connections that pine will use +max-remote-connections= + +# A list of folders that should be left open once opened (INBOX is implicit) +stay-open-folders= + +# Specifies the number of dead letter files to keep when canceling. +dead-letter-files= + +# List of incoming msg folders besides INBOX, e.g. ={host2}inbox, {host3}inbox +# Syntax: optnl-label {optnl-imap-host-name}folder-path +incoming-folders= + +# List of directories where saved-message folders may be. First one is +# the default for Saves. Example: Main {host1}mail/[], Desktop mail\[] +# Syntax: optnl-label {optnl-imap-hostname}optnl-directory-path[] +folder-collections= + +# List, only needed if nntp-server not set, or news is on a different host +# than used for NNTP posting. Examples: News *[] or News *{host3/nntp}[] +# Syntax: optnl-label *{news-host/protocol}[] +news-collections=News-Tcom {news.t-com.hr/nntp}#news.[], + News-Motzarella {news.eternal-september.org/user=anrxc/nntp}#news.[], + News-Gmane {news.gmane.org/nntp}#news.[] + +# List of file or path names for personal addressbook(s). +# Default: ~/.addressbook (Unix) or \PINE\ADDRBOOK (PC) +# Syntax: optnl-label path-name +address-book= + +# List of file or path names for global/shared addressbook(s). +# Default: none +# Syntax: optnl-label path-name +global-address-book= + +# Set by Pine; controls beginning-of-month sent-mail pruning. +last-time-prune-questioned=109.8 + +# Set by Pine; controls display of "new version" message. +last-version-used=6.00 + +# This names the path to an alternative program, and any necessary arguments, +# to be used in posting mail messages. Example: +# /usr/lib/sendmail -oem -t -oi +# or, +# /usr/local/bin/sendit.sh +# The latter a script found in Pine distribution's contrib/util directory. +# NOTE: The program MUST read the message to be posted on standard input, +# AND operate in the style of sendmail's "-t" option. +sendmail-path= + +# This names the root of the tree to which the user is restricted when reading +# and writing folders and files. For example, on Unix ~/work confines the +# user to the subtree beginning with their work subdirectory. +# (Note: this alone is not sufficient for preventing access. You will also +# need to restrict shell access and so on, see Pine Technical Notes.) +# Default: not set (so no restriction) +operating-dir= + +# If no user input for this many hours, Pine will exit if in an idle loop +# waiting for a new command. If set to zero (the default), then there will +# be no timeout. +user-input-timeout= + +# Sets the time in seconds that Pine will attempt to open a network +# connection. The default is 30, the minimum is 5, and the maximum is +# system defined (typically 75). +tcp-open-timeout= + +# Network read warning timeout. The default is 15, the minimum is 5, and the +# maximum is 1000. +tcp-read-warning-timeout=20 + +# Network write warning timeout. The default is 0 (unset), the minimum +# is 5 (if not 0), and the maximum is 1000. +tcp-write-warning-timeout= + +# If this much time has elapsed at the time of a tcp read or write +# timeout, pine will ask if you want to break the connection. +# Default is 60 seconds, minimum is 5, maximum is 1000. +tcp-query-timeout=20 + +# Sets the format of the command used to open a UNIX remote +# shell connection. The default is "%s %s -l %s exec /etc/r%sd" +# NOTE: the 4 (four) "%s" entries MUST exist in the provided command +# where the first is for the command's path, the second is for the +# host to connnect to, the third is for the user to connect as, and the +# fourth is for the connection method (typically "imap") +rsh-command= + +# Sets the name of the command used to open a UNIX remote shell connection. +# The default is tyically /usr/ucb/rsh. +rsh-path= + +# Sets the time in seconds that Pine will attempt to open a UNIX remote +# shell connection. The default is 15, min is 5, and max is unlimited. +# Zero disables rsh altogether. +rsh-open-timeout= + +# Sets the format of the command used to open a UNIX secure +# shell connection. The default is "%s %s -l %s exec /etc/r%sd" +# NOTE: the 4 (four) "%s" entries MUST exist in the provided command +# where the first is for the command's path, the second is for the +# host to connnect to, the third is for the user to connect as, and the +# fourth is for the connection method (typically "imap") +ssh-command= + +# Sets the name of the command used to open a UNIX secure shell connection. +# Tyically this is /usr/bin/ssh. +ssh-path= + +# Sets the time in seconds that Pine will attempt to open a UNIX secure +# shell connection. The default is 15, min is 5, and max is unlimited. +# Zero disables ssh altogether. +ssh-open-timeout= + +# Sets the version number Pine will use as a threshold for offering +# its new version message on startup. +new-version-threshold= + +# List of mail drivers to disable. +disable-these-drivers= + +# List of SASL authenticators to disable. +disable-these-authenticators= + +# Set by Pine; contains data for caching remote address books. +remote-abook-metafile= + +# How many extra copies of remote address book should be kept. Default: 3 +remote-abook-history= + +# Minimum number of minutes between checks for remote address book changes. +# 0 means never check except when opening a remote address book. +# -1 means never check. Default: 5 +remote-abook-validity= + +# Your default printer selection +printer= + +# List of special print commands +personal-print-command= + +# Which category default print command is in +personal-print-category= + +# Patterns and their actions are stored here. +patterns-roles=REMOVED + +# Patterns and their actions are stored here. +patterns-filters2=REMOVED + +# Patterns and their actions are stored here. +patterns-scores2= + +# Patterns and their actions are stored here. +patterns-indexcolors= + +# Patterns and their actions are stored here. +patterns-other= + +# Controls display of color +# - 256 colors needed for the Zenburn color scheme +color-style=force-xterm-256color + +# Controls display of color for current index line +current-indexline-style=flip-colors + +# Controls display of color for the titlebar at top of screen +titlebar-color-style=default + +# Alpine colors +# - Zenburn color scheme +normal-foreground-color=220,220,204 +normal-background-color=60,60,60 +reverse-foreground-color=204,147,147 +reverse-background-color=60,60,60 +title-foreground-color=172,188,144 +title-background-color=30,35,32 +status-foreground-color=239,239,143 +status-background-color=60,60,60 +keylabel-foreground-color=172,188,144 +keylabel-background-color=30,35,32 +keyname-foreground-color=172,188,144 +keyname-background-color=30,35,32 +selectable-item-foreground-color=240,223,175 +selectable-item-background-color=60,60,60 +quote1-foreground-color=127,159,127 +quote1-background-color=60,60,60 +quote2-foreground-color=176,196,222 +quote2-background-color=60,60,60 +quote3-foreground-color=127,127,127 +quote3-background-color=60,60,60 +signature-foreground-color=240,223,175 +signature-background-color=60,60,60 +prompt-foreground-color=176,196,222 +prompt-background-color=60,60,60 +meta-message-foreground-color=239,239,143 +meta-message-background-color=60,60,60 +index-to-me-foreground-color=240,223,175 +index-to-me-background-color=60,60,60 +index-important-foreground-color=red +index-important-background-color=60,60,60 +index-deleted-foreground-color=240,223,175 +index-deleted-background-color=60,60,60 +index-answered-foreground-color=240,223,175 +index-answered-background-color=60,60,60 +index-new-foreground-color=240,223,175 +index-new-background-color=60,60,60 +index-forward-foreground-color=240,223,175 +index-forward-background-color=60,60,60 +index-recent-foreground-color= +index-recent-background-color= +index-unseen-foreground-color= +index-unseen-background-color= +index-arrow-foreground-color=240,223,175 +index-arrow-background-color=60,60,60 +index-subject-foreground-color= +index-subject-background-color= +index-from-foreground-color= +index-from-background-color= +index-highpriority-foreground-color= +index-highpriority-background-color= +index-lowpriority-foreground-color= +index-lowpriority-background-color= +index-opening-foreground-color= +index-opening-background-color= +incoming-unseen-foreground-color= +incoming-unseen-background-color= +header-general-foreground-color=240,223,175 +header-general-background-color=30,35,32 +title-closed-foreground-color= +title-closed-background-color= + +# - Humvee color scheme +# normal-foreground-color=189,183,107 +# normal-background-color=38,38,38 +# reverse-foreground-color=255,215,0 +# reverse-background-color=38,38,38 +# title-foreground-color=white +# title-background-color=102,102,102 +# status-foreground-color=255,215,0 +# status-background-color=38,38,38 +# keylabel-foreground-color=white +# keylabel-background-color=102,102,102 +# keyname-foreground-color=white +# keyname-background-color=102,102,102 +# selectable-item-foreground-color=255,215,0 +# selectable-item-background-color=38,38,38 +# quote1-foreground-color=127,127,127 +# quote1-background-color=38,38,38 +# quote2-foreground-color=143,188,143 +# quote2-background-color=38,38,38 +# quote3-foreground-color=107,142,35 +# quote3-background-color=38,38,38 +# signature-foreground-color=154,205,50 +# signature-background-color=38,38,38 +# prompt-foreground-color=143,188,143 +# prompt-background-color=38,38,38 +# meta-message-foreground-color=255,215,0 +# meta-message-background-color=38,38,38 +# index-to-me-foreground-color=154,205,50 +# index-to-me-background-color=38,38,38 +# index-important-foreground-color=red +# index-important-background-color=38,38,38 +# index-deleted-foreground-color=154,205,50 +# index-deleted-background-color=38,38,38 +# index-answered-foreground-color=154,205,50 +# index-answered-background-color=38,38,38 +# index-new-foreground-color=154,205,50 +# index-new-background-color=38,38,38 +# index-forward-foreground-color=154,205,50 +# index-forward-background-color=38,38,38 +# index-recent-foreground-color= +# index-recent-background-color= +# index-unseen-foreground-color= +# index-unseen-background-color= +# index-arrow-foreground-color=154,205,50 +# index-arrow-background-color=38,38,38 +# index-subject-foreground-color= +# index-subject-background-color= +# index-from-foreground-color= +# index-from-background-color= +# index-highpriority-foreground-color= +# index-highpriority-background-color= +# index-lowpriority-foreground-color= +# index-lowpriority-background-color= +# index-opening-foreground-color= +# index-opening-background-color= +# incoming-unseen-foreground-color= +# incoming-unseen-background-color= +# header-general-foreground-color=154,205,50 +# header-general-background-color=38,38,38 +# title-closed-foreground-color= +# title-closed-background-color= + +# When viewing messages, these are the header colors +viewer-hdr-colors= + + +# Add these customized headers (and possible default values) when composing +customized-hdrs=From: REMOVED, + User-Agent: Alpine/2.00 (Linux) + +# Specifies the string to replace quotes with when viewing a message. +quote-replace-string= + +# Characters which surround keywords in SUBJKEY token. +# Default is "{" "} " +keyword-surrounding-chars= + +# Sets the filename for the newmail fifo (named pipe). Unix only. +newmail-fifo-path= + +# Sets the width for the NewMail screen. +newmail-window-width= + +# Colors used to display keywords in the index +keyword-colors= + +# Reflects capabilities of the display you have. +# If unset, the default is taken from your locale. That is usually the right +# thing to use. Typical alternatives include UTF-8, ISO-8859-x, and EUC-JP +# (where x is a number between 1 and 9). +display-character-set= + +# Reflects capabilities of the keyboard you have. +# If unset, the default is to use the same value +# used for the display-character-set. +keyboard-character-set= + +# Defaults to UTF-8. This is used for outgoing messages. +# It is usually correct to leave this unset. +posting-character-set= + +# Number of times per-second to update active status messages +active-msg-updates-per-second= + +# Sets the time in seconds that Alpine will attempt to open a network +# connection when checking for new unseen messages in an incoming folder. +# The default is 5. +incoming-check-timeout= + +# Sets the approximate number of seconds between checks for unseen messages +# in incoming folders. The default is 180. +incoming-check-interval= + +# List of incoming folders to check for unseen messages. The default if left +# blank is to check all incoming folders. +incoming-check-list= + +# WebAlpine index table row height +wp-indexheight= + +# WebAlpine number of index lines in table +wp-indexlines= + +# WebAlpine aggregate operations tab state +wp-aggstate= + +# WebAlpine various aspects of cross-session state +wp-state= + +# WebAlpine preferred width for message display in characters +wp-columns= + +# Number of times per-second to update busy cue messages +busy-cue-rate= + +# When these characters appear in the middle of a word in the composer +# the forward word function will stop at the first text following (as happens +# with SPACE characters by default) +composer-word-separators= + +# Characters between subject and opening text in SUBJECTTEXT token. +# Default is " - " +opening-text-separator-chars= + +# Sets the approximate number of seconds between checks for unseen messages +# for other than local or IMAP folders. The default is 180. +incoming-check-interval-secondary= + +# Patterns and their actions are stored here. +patterns-search= + +# LDAP servers for looking up addresses. +ldap-servers= + +# Sets presentation order of threads in thread index. Choices: +#arrival, and thread. +thread-sort-key= + +# Allows a user to specify the threading style of specific folders +threading-display-style-rule= + +# Allows a user to specify the threading index style of specific folders +threading-index-style-rule= + +# Allows a user to set rules when composing messages. +compose-rules= + +# Allows a user to set rules when forwarding messages. +forward-rules= + +# Allows a user to supersede global index format variable in designated folders. +index-rules= + +# Allows a user to override keystrokes in certain screens. +key-definition-rules= + +# Allows a user to change the form a specify field in the index-format is +# displayed. +replace-rules= + +# Allows a user to change the form a specify a reply-indent-string +# based of rules. +reply-indent-rules= + +# Allows a user to replace the reply-leadin message based on different parameters. +reply-leadin-rules= + +# Allows a user to replace the subject of a message in a customs based way +reply-subject-rules= + +# Allows a user to specify a save folder message for specific senders or folders. +save-rules= + +# Allows a user to specify a smtp server to be used when sending e-mail, +# according to the rules specified here. +smtp-rules= + +# Allows a user to specify the sort default order of a specific folder. +sort-rules= + +# Allows a user to specify the position of a highlighted message when opening a +# folder. +startup-rules= + +# Specifies a comma separated list of text and regular expresions that Pine +# will highlight +special-text-color= +special-text-foreground-color= +special-text-background-color= + +# Location relative to your HOME directory of the directory where your INBOX +# for the maildir format is located. Default value is "Maildir". If your +# inbox is located at "~/Maildir" you do not need to change this value. +# A common value is also ".maildir" +maildir-location= + +# If set, specifies where trash is moved to in Web Alpine. +trash-folder= + +# Defaults to nothing, which is equivalent to US-ASCII. This is used for +# unlabeled incoming messages. It is ok to leave this unset but if you receive +# unlabeled mail that is usually in some known character set, set that here. +unknown-character-set= + +# Public certificates are kept in files in this directory. The files should +# contain certificates in PEM format. The name of each file should look +# like .crt. The default directory is .alpine-smime/public. +smime-public-cert-directory= + +# If this option is set then public certificates are kept in a single container +# "file" similar to a remote configuration file instead of in the +# smime-publiccert-directory. The value can be a remote or local folder +# specification like for a non-standard pinerc value. The default +# is that it is not set. +smime-public-cert-container= + +# Private keys are kept in files in this directory. The files are in PEM format. +# The name of a file should look like .key. +# The default directory is .alpine-smime/private. +smime-private-key-directory= + +# If this option is set then private keys are kept in a single container +# "file" similar to a remote configuration file instead of in the +# private-key-directory. The value can be a remote or local folder +# specification like for a non-standard pinerc value. The default +# is that it is not set. +smime-private-key-container= + +# Certificate Authority certificates (in addition to the normal CACerts for the +# system) are kept in files in this directory. The files are in PEM format. +# Filenames should end with .crt. The default directory is .alpine-smime/ca. +smime-cacert-directory= + +# If this option is set then CAcerts are kept in a single container +# "file" similar to a remote configuration file instead of in the +# ca-cert-directory. The value can be a remote or local folder +# specification like for a non-standard pinerc value. The default +# is that it is not set. +smime-cacert-container= + +# RSS News feed +rss-news= + +# RSS Weather feed +rss-weather= -- cgit v1.2.3